CleanScrape® Cleaner Eliminates Excessive Carryback on Conveyor Carrying Wood Chips
Product Types Used Belt Cleaning Solutions , Primary Belt Cleaners
Industry Pulp and Paper
Customer Stirling, Scotland

Problem

Fine dust and shards of wood spilled along the belt path and piled on surfaces.

A producer of Medium Density Fiberboard and Chipboard was experiencing excessive carryback on the conveyor system transporting wood chips to the screening process. On its way to the pressboard plant, wood is passed through a pre-chipper and screened to remove fine material. At that stage the wood is damp and sticky, causing smaller particles to cling to the return side of the belt. The standard primary poly scraper was ineffective at removing adhered material from the belt, resulting in a high amount of carryback, which dropped along the belt path, piling around the mainframe. This required extra labor to clean the area 2 hours per day, raising operating costs and affecting workplace safety.

Solution

Stretched across the entire belt profile, the Cleanscrape® Cleaner offers edge-to-edge cleaning.

Examining the carryback issue and the physical properties of the material, Martin Engineering UK technicians recommended that the company install a Cleanscrape® Cleaner. Comprised of a matrix of tungsten carbide scrapers, the blade is mounted and tensioned against the belt using specially engineered stringers installed diagonally across the discharge pulley. This causes the blade to form a three dimensional curve with an extremely low contact pressure between belt and cleaner, which easily passes over the splice, but typically removes of as much as 95% of difficult material. Designed to cover the entire width of the belt, the cleaner delivers double the life of most standard blades.

Results

By removing fine material from the belt, more product is captured in the discharge flow.

The Cleanscrape® Cleaner was installed with a very compact footprint on the existing system and offered immediate results. Carryback has been reduced dramatically, and operators report that cleaning time has gone from 2 hours per day down to one 1 hour per week. "We are truly amazed by how effective this blade is," an operator close to the project pointed out. "We had no idea just how inefficiently our previous blade had been performing." Managers were so pleased with the results that they have since installed a unit on another conveyor, providing the same impressive results.

Resources

PDF - Printable Version of Case Study Download
Brochure - Belt Cleaning Solutions Download
Brochure - Martin Engineering Corporate Profile Download

View Additional Resources